 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRELIMINARY DATA SHEET | MARCH 21, 2008 PONA 3000 Series Erbium Doped Fiber Amplifier Applications * * * * High Performance Supertrunking Links High Power Distribution Networks Fiber Deep Architectures FTTx Networks Features * * * * Full Function High Power Fiber Optic Amplifier Ready for Integration Low Noise Figure (Typ < 6 dB) Total Input Power Range: -10 dBm to +12 dBm Total Output Power: +27 dBm to +35 dBm (Optical Output Power Splitter is Optional For These Units) * * * * * Standard RS-232 Communications Low Electrical Power Consumption Input / Output Isolation > 40/40 dB Polarization Dependant Gain < 0.1 dB Polarization Mode Dispersion < 0.5 ps The EMCORE PONA 3000 Series Fiber Optical Amplifier Module is an ideal building block for OEM system integrators. The family of PONA 3000 Optical Amplifiers is designed to meet the most demanding noise performance requirements of CATV and FTTx applications, and performs all the functions required of an optical amplifier for system integration. Packaged in a convenient 2RU housing, the PONA 3000 series optical amplifiers provide optical isolation on the input and output of the gain block for stable, low noise operation. The input and output optical signal power levels are detected for monitoring and control. The input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. The PONA 3000 series optical amplifiers also provide monitoring functions and associated alarms for all vital characteristics. The optical output of the PONA 3000 series optical amplifiers can be split into number of ports by an optional internal splitter. PONA3000 series includes AC/DC power supply, front panel, optical splitters, network card and all necessary connectors. 1 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Specifications PROPERTY Product Code PERFORMANCE Operating Input Power Operating Input Power Output Power Noise Figure Static Gain Flatness Dynamic Gain Flatness Output Power Stability Power Consumption (steady state regime) Remnant pump power to output UNIT LIMIT 3027 Pin (dBm) Pin (dBm) Po (dBm) NF (dB) GF (dB) (dB) (dB) Psys (W) Prp (dBm) Max Min Typ/Max Max Max Max Max Nom. +12 -10 27.0 5.5/6.0 +/-1.0 +/-2.00 +/- 0.25 40 25 <-30 PONA MODELS 3030 3032 +12 -10 30.0 5.5/6.0 +/-1.0 +/-2.00 +/- 0.25 50 30 <-30 +12 -10 32.0 5.5/6.0 +/-1.0 +/-2.25 +/-0.25 65 40 <-30 COMMENT 3035 (note 1) +12 -10 35.0 5.5/6.0 +/-1.0 +/-2.50 +/- 0.25 80 50 <-30 Nominal (note 2) (note 3) (note 4) (note 5) (note 6) o 50 C Case (premium) o 50 C Case (economy) (note7) Notes: 1) Unless stated otherwise all specifications apply over the full temperature range and humidity 2) Depending on the fiber optic patchcord interface the measured value can vary up to 0.5 dB less than the actual value 3) Measured @ 25C, EPin = 0 dBm 4) Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25C 5) Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1553nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25C 6) Stability over polarization and temperature 7) Premium version - PONA with cooled, Telcordia qualified pumps Economy version - PONA with uncooled pumps Physical GENERAL PROPERTY Operating Wavelength Operating Case Temperature Storage Temperature Operating Humidity Voltage Supply Range REQUIREMENT 1545 ~ 1562nm 0C to 50C -40C to 85C 20% to 85% 85 VAC to 265 VAC 50/60 Hz -36 to -60 V DC COMMENTS Standard Standard Standard Non-condensing AC version DC version *(Redundant Power Supply is Available by Customer Request) Optical Connectors Dimensions In Inches See ordering information 19.0"W x 15.7"D x 3.44"H User Specified 19'' Rack Mounted, 2 RU 2 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Block Diagram: Cladding Pump Technology Cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and multi-mode pump lasers) to produce cost effective high power optical amplification. This technology enables the development of higher power EDFAs-something that is cost prohibitive when using standard erbium fiber and single mode pumps. Input Hybrid Er Filter / Isolator Er/Yb Assembly Isolator 1% Tap 980 nm pump Input monitor Multi-mode pumps Drive Electronics Output Monitor Sample FTTx Architecture Splitter Voice Data OLT 1490nm 1310nm ONT ONT ONT ONT Businesses - Voice - Data - Video ONT ONT ONT ONT WDM 1550nm Video 1550nm Tx RF Splitter Splitter Multi Dwelling Units 20 Km Splitter ONT ONT ONT ONT EDFA 20 outputs of 20 dBm Homes 3 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Outline Drawing AC and DC versions shown below with 8-port option 4 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. PRELIMINARY DATA SHEET | MARCH 21, 2008 Ordering Information * PONA30 - - - - - Power Level 27: 27 dBm 30: 30 dBm 32: 32 dBm 35: 35 dBm Connector Options SC: SC/APC FC: FC/APC EC: E2000/APC TC: SC/UPC GC: FC/UPC # of Output Ports 01: 1 port 02: 2 ports 04: 4 ports 08: 8 ports 16: 16 ports 20: 20 ports Class P: Premium E: Economy Input Voltage AC: 90-260 VAC 50/60 Hz DC: -48 VDC 2DC: Redundant DC Class: Premium: Utilizes cooled pump lasers Economy: Utilizes uncooled pump lasers * PONA3000 series with one or two optical outputs will have special high power output optical connector(s) and optical bulkhead(s) For exact model number, please contact your Sales Representative. Qualifications FCC: Subpart B. Part 15, class "A" Unintentional Radiators CE: EN50083-2, 19995 with Amendment 1, which Incorporates EN 55013 Radiated and Conducted Emissions EN 61000-4-3 Radiated Immunity EN 55020 Conducted Immunity EN 61000-3-2 Harmonics All Components Meet Telcordia GR-1312 and GR-486 Standards (Except Pumps in Economy Class). EN 61000-3-2 Harmonics Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. 5 of 5 For more information on this and other products: Contact EMCORE sales at 626-293-3400, or visit www.emcore.com. |
Price & Availability of PONA30
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |